|
Compressor Specifications-Compressor Type: Forged-Milled Wheel (FMW) Extended Tip -Compressor Wheel OD (exducer): 67mm
-Compressor Wheel Inducer: 53.9mm
-Max Flow Rate: 49 lb/min
-Built-in BOV: All EFR compressor housings incorporate an integrated BOV.
-Compressor Housing: 2.5" inlet, 2.0" hose coupler outlet
Turbine Specifications-Turbine Type: Low Inertia Gamma-Ti Turbine Wheel
-Turbine Wheel OD: 58mm
-Stainless Steel Investment cast Housing
-Turbine outlet: GT-Vband (aka small 3" vband) ~92mm OD for all EFR turbos
Features-Dual Row Ceramic Ball Bearings - lowest friction and fastest spool/response, most extreme durability, built-in oil control orifice - (aka oil restrictor) **no restrictor can be used with EFR turbos
-Watercooled Center Section - watercooling is recommended, 14mm banjo bolts
-Double seals on both turbine and compressor end for extreme durability and resistance to any oil seepage
-Boost Control Solenoid Valve Integrated to Compressor Housing
-Integrated Speed Sensor mounting provisions
|
