Line & Hose Protection

dei_linehose.jpg
DEI Heat Sheath

Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F.

  • Pliable for tight bends
  • Capable of withstanding 500°F direct / 2000°F radiant heat
  • Five popular diameters to choose from
  • Trim to desired length
Quantity
010405-heat-shroud.jpg
DEI Heat Shroud

Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges.

  • Versatility of fitting diameters ½” to 1-1/4”
  • Convenient hook & loop designed edges
  • Withstands 500°F direct continuous/2000°F radiant heat
  • No need to remove wires and hoses
  • Easily trimed to length
  • Fireproof
  • 1⁄2” to 1-1/4” diameters x 3 foot length
Quantity
dei-firesleeve.jpg
DEI Fire Sleeve & Tape Kits

Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F.

Each kit includes a 16-inch length of black Fire Tape to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look.

  • Insulates wiring, hoses, oil / brake / transmission lines & more
  • Use for bundling and protecting hoses, electrical wiring etc.
  • Withstands 500°F continuous / 2000°F intermittent heat
  • Burn protection during under hood repairs and maintenance
  • Includes a 16” length of Fire Tape
Quantity
dei-firewrap3000.jpg
DEI Fire Wrap 3000

Constructed from the same material as Fire Sleeve but with the convenience of a hook & loop edge closure design. Simply wrap Fire Wrap 3000 around wires, cables or hoses without the need of disconnecting.

  • Withstands direct heat up to 500°F
  • Protects against oil, dirt, road grime and other contaminates
  • Pliable enough to shape & fit tightest bends
Quantity
dei-firetape.jpg
DEI Fire Tape

Fire Tape is a multi use self-fusing tape that can be used to cover wires, seal temporary leaks, and much much more. Made of a non-adhesive silicone rubber, Fire Tape is waterproof, remains flexible, and does not leave a sticky residue after removal.

Ideal for use with Fire Sleeve and other DEI line & hose protective sleeving products, it serves as an excellent insulating alternative to vinyl tapes and wraps. Other uses include wrapping wiring harnesses, cover and protect wire splices, and electrical wire terminations.

  • Corrosion & moisture resistant
  • 700 psi tensile strength
  • Stretch and wrap application
  • Permanent air/liquid tight seal
  • Withstands 500°F direct continuous heat
  • Self-bonding and self-curing
  • Does not harden - remains flexible
  • 36 ft x 1” wide roll
Price: $48.23
Sale Price $41.50
Quantity
Share on Facebook