The High Torque 2.0KW starter greatly increases the cranking RPM for much faster starting. Perfect for heavily modified engines (20B, 3mm seal, Bridgeport, etc) that are slow to fire up during cranking due to the additional mass or sealing characteristics of aftermarket apex seals. Additionally, engines with low compression or hot start/flooding issues benefit from this starters much faster RPM.
The original FD starter is rated at 1.2KW (1.61HP), the 2.0KW (2.68HP) is a 40% increase in starter cranking power. Depending on battery CCA and health the cranking speed will increase by as much as 100RPM.
Starters are built from all new parts, with exception to the FD gear housings, which are from core starters. Every starter is tested prior to leaving our facility.
Manual Transmission Only.
Refundable Core Charge once we receive a Manual Trans FD starter, that has an undamaged gear housing (nose).
We have come up with this simple product to easily bypass the Starter Cut Relay for both the FD and FC. This relay is commonly associated with starting issues. Just unplug the relay and install our bypass.
Starter Relay Kit for all Mazda RX-7's
The "click, click, start" issue is a very common problem with the RX7, as the electrical components age the problem gets worse. Our easy to install Starter Relay Kit mounts next to the starter to insure that the solenoid gets full voltage when you turn the key. We have developed this kit utilizing a completely waterproof 50 amp relay with a built in resistor for voltage spikes, all terminals have heat shrink insulation for durability and protection.
Works with all starters.
All Banzai Racing products are Made in the USA
Please Refresh page to ensure that you have the most up-to-date version.
If you have questions or comments, you can contact us by Phone: 574-594-2035 or Email us: email@example.com
Customer Service & Site Information / Banzai Racing Website: www.Banzai-Racing.com